Aftermarket Stereo

Hi,

We have a 99 Venture. We want to install an aftermarket stereo in where the standard factory installed cassette deck is. I looked at it briefly and it seems to be a 1.5 DIN height opening. I did a search under stereo and it seems like the bezel is easy enough to remove. Has anyone replaced theirs? Does a standard Din sized stereo fit? I know there will be extra space.


Thanks.

Hmm

if you buy a universal installition kit for the van, it should all for multilple din sizes...?

Hmm

if you buy a universal installition kit for the van, it should all for multilple din sizes...?

Yes that is true.

I am trying to determine if the opening is wide enough. IE standard DIN width (it is easier to make the opening smaller but much harder to make larger.)

A follow up question:

Has anyone replaced their factory speakers? If so are they a standard size? I think the fronts may be 5 1/4" and I assume the holes will line up.

Thanks.

I'd suggest that you check crutchfield.com for speaker sizes....Glen

I'd suggest that you check crutchfield.com for speaker sizes....Glen
:iagree: I was going to post about Crutchfield, but I see someone beat me to it:grinyes: I've purchased car audio items, (stereos, speakers, etc.,) from them for almost 20 years and have had good luck. They have a lot of info on their website, and their customer service is great too.

Thanks. I will try Crutchfield. I just thought that if someone had replaced their speakers that they would know..........

Hmmm
I just checked Crutchfield, and it listed both 5-1/4" AND 6-1/2" as being correct for the front.

So... which is it?
:screwy:

The 6 1/2" is listed mainly as it is the largest speaker that will fit in the factory location.There are other sizes that will fit but the largest that will fit is the 6 1/2" size.

In the future please don't resurrect old threads, rather start a new thread and link to the old thread if necessary. Here is an excerpt from the Community Guidelines that outline the proper procedures for posting on this forum:
"POSTING IN CLOSED OR OUTDATED THREADS:
Please avoid posting or voting in outdated threads. It merely clutters up the message board and makes it more difficult for fellow members to sort through the vast amount of information contained on the boards. If you have new and important information to add regarding a past discussion, feel free to start a new thread and if need be, add a link to the original thread."
The link to the whole guidelines can be found here:http://www.automotiveforums.com/vbulletin/guidelines.html

Thread closed