1995 Chevy S10 Blazer 4x4 Blinkers work intermittently.
|
|
1995 Chevy S10 Blazer 4x4 Blinkers work intermittently. LJNY 08-06-2006, 06:09 PM
Hi All... I hope someone has suggestions for me on this. My blinkers left and right intermittently work. Sometimes they start to work and then stop working. I was told to replace the flasher unit (even though those work just fine). My problem is that I can't find the flasher unit. I am thinking I have to take apart my dash just to find it. Is there another cause maybe? Does anyone know where I can get a diagram of where the flasher unit(s) are? I was also told there may be two of them. I am open to any and all suggestions!! Great_Auk 06-03-2007, 08:29 PM Have a similar problem on my 95 S-10. The flasher relays are in the back of the glovebox, behind a plastic cover. Had a challenge to get that cover off. There are two flashers. Paid about $9 each. I changed both, but no improvement. My brake lights all work, my 4-way flashers all work. Have seen some other posts about possible causes: 1) Turn signal switch assembly 2) bad wire connection to flasher unit 3) multi-function switch in steering column. My flashers started to work slower, and slower .. long on-off cycle. Then it would be intermittent. Will be taking it to a mechanic soon, as I have exhaused all my amatuer diagnostics. Good Luck. :-) ZL1power69 06-03-2007, 09:23 PM this thread is almost a year old. please refrain from posting in old threads. Related Links Enter the largest automotive community on the planet! |