I just replaced my wheel bearing yesterday, after the service vehicle soon, trac off and ABS lights all came on. A common thing with Aleros, apparently. Anways, the lights all came on again today and I am curious if the code resets itself, or if I have to somehow manually clear the code so the lights don't come on again.
I know the problem is fixed because the car is much quieter now.
I appreciate any help!

Normally after doing a hub replacement the error codes and lights are cleared by using an ABS capable scanner. But if you got the right hub replaced the lights may clear after a few drive cycles.

When you first start the engine are the lights on or off or do they come on after road movement?

Welcome to AF.

It was the right hub that we replaced. The lights came on after I started moving today, but I think I'll try driving it a few more times before I have someone clear it with a scanner. Thanks for your help, and thanks for the welcome, this forum is great! :smile: