Red Rocks Park
Mr. Luos
06-17-2006, 03:50 PM
I was bored this afternoon, so I took out the T/A and went for a bit of a drive.
Not too far today, just down to Red Rocks Park. Went to get some new pics with a better background than the driveway.
Some turned out okay, but the car was a little dirty.
http://home.comcast.net/~mrluoss/Red_Rocks24.JPG
http://home.comcast.net/~mrluoss/Red_Rocks01.JPG
http://home.comcast.net/~mrluoss/Red_Rocks10.JPG
http://home.comcast.net/~mrluoss/Red_Rocks13.JPG
http://home.comcast.net/~mrluoss/Red_Rocks28.JPG
http://home.comcast.net/~mrluoss/Red_Rocks30.JPG
http://home.comcast.net/~mrluoss/Red_Rocks25.JPG
Not too far today, just down to Red Rocks Park. Went to get some new pics with a better background than the driveway.
Some turned out okay, but the car was a little dirty.
http://home.comcast.net/~mrluoss/Red_Rocks24.JPG
http://home.comcast.net/~mrluoss/Red_Rocks01.JPG
http://home.comcast.net/~mrluoss/Red_Rocks10.JPG
http://home.comcast.net/~mrluoss/Red_Rocks13.JPG
http://home.comcast.net/~mrluoss/Red_Rocks28.JPG
http://home.comcast.net/~mrluoss/Red_Rocks30.JPG
http://home.comcast.net/~mrluoss/Red_Rocks25.JPG
79Bandit
06-17-2006, 03:53 PM
looking good like always...i washed and waxed bandit yesterday and woke up this morning only to find out that the rock coreor (however you spell that) must of been blasting because its covered in dust...:(
karll
06-17-2006, 11:01 PM
I know we have been over this before Luos, but what gauges do you have on your A-pillar? I think I remember oil pressure being one, but the others slip my min. Just curious.
Mr. Luos
06-17-2006, 11:09 PM
No oil pressure.
Top one is A/F. Not hooked up though. Working on saving up for a wideband A/F gauge instead of this one.
Middle is fuel pressure.
Bottom is water temp.
I have a pic of them installed, but it is on my PC. Using the laptop right now. I will post it later.
They are carbon fiber faced. I wanted them to fit in with the grey'ish' interior. Worked well I think.
Top one is A/F. Not hooked up though. Working on saving up for a wideband A/F gauge instead of this one.
Middle is fuel pressure.
Bottom is water temp.
I have a pic of them installed, but it is on my PC. Using the laptop right now. I will post it later.
They are carbon fiber faced. I wanted them to fit in with the grey'ish' interior. Worked well I think.
MADracing
06-18-2006, 01:03 AM
Nice pics...what a backdrop!
BTW...
Does your Fuel pressure gauge move at all except at WOT?
Even when you start your car? Mine sits at 60 psi and only moves at WOT.
BTW...
Does your Fuel pressure gauge move at all except at WOT?
Even when you start your car? Mine sits at 60 psi and only moves at WOT.
TMC2k1
06-18-2006, 01:21 AM
Luos, your car looks great! BUT id love to see more pics of MADracing's car. Man your car looks beautiful and i like those rims and i love the whole carbon fiber interior :)
Mr. Luos
06-18-2006, 09:47 AM
BTW...
Does your Fuel pressure gauge move at all except at WOT?
Even when you start your car? Mine sits at 60 psi and only moves at WOT.
I am using a good amount of fuel, it does drop a little bit under normal acceleration.
It does drop considerably under WOT.
42# injectors with a 255 Racetronix kit pump.
Cold idle = 68 PSI
Hot idle = 63 PSI
WOT = 57-60 PSI
And the gauges pic. This was taken when the motor was out. I need to get a newer pic.
http://home.comcast.net/~mrluoss/Swap085.JPG
Does your Fuel pressure gauge move at all except at WOT?
Even when you start your car? Mine sits at 60 psi and only moves at WOT.
I am using a good amount of fuel, it does drop a little bit under normal acceleration.
It does drop considerably under WOT.
42# injectors with a 255 Racetronix kit pump.
Cold idle = 68 PSI
Hot idle = 63 PSI
WOT = 57-60 PSI
And the gauges pic. This was taken when the motor was out. I need to get a newer pic.
http://home.comcast.net/~mrluoss/Swap085.JPG
MADracing
06-18-2006, 11:19 AM
Luos, your car looks great! BUT id love to see more pics of MADracing's car. Man your car looks beautiful and i like those rims and i love the whole carbon fiber interior :)
Thanks for compliments, I have a page on Car Domain.com heres a link to my page... http://www.cardomain.com/ride/2341126
Mr. Lous, gauges look good...
Thanks for compliments, I have a page on Car Domain.com heres a link to my page... http://www.cardomain.com/ride/2341126
Mr. Lous, gauges look good...
knight7
06-18-2006, 11:37 AM
very nice scenery... mindblowin pix! I wish i lived near colorado mnts instead of chicago :*(.
ikeyballz
06-18-2006, 01:43 PM
i love your rims, luos. those are crazy. they stand out really nice on your black car...
how much/whered you get them? mustve cost you a hella lot
how much/whered you get them? mustve cost you a hella lot
doodad
06-18-2006, 02:01 PM
Thanks for compliments, I have a page on Car Domain.com heres a link to my page... http://www.cardomain.com/ride/2341126
Mr. Lous, gauges look good...
man, on your cardomain the 3rd pic, front view, can you send that here with wallpaper size? l am gonna use it as a wallpaper!! damn, it looked like a lambo or ferrari to me when l first looked.
thanks..
Mr. Lous, gauges look good...
man, on your cardomain the 3rd pic, front view, can you send that here with wallpaper size? l am gonna use it as a wallpaper!! damn, it looked like a lambo or ferrari to me when l first looked.
thanks..
doodad
06-18-2006, 02:04 PM
Curtis, l have over 20 pics of your car on my computer.. l used most of them as a wallapaper.. l am gonna put some of them on frame when l set everything up at home.. beatiful pics.. l just cant wait to get an LS1 and get those wheels and 335s to the rear wheels :) will be wider than yours..:lol:
Mr. Luos
06-18-2006, 02:29 PM
Good luck fitting a 335. :lol:
They can be fit, but you will need the fenders rolled!
I found the wheels from an EBay store.
TomZWheels has them for $850 a set right now I believe.
17x9.5 front (BFG KDW 275/45/17)
17x11 rear (Nitto DR 315/35/17)
They can be fit, but you will need the fenders rolled!
I found the wheels from an EBay store.
TomZWheels has them for $850 a set right now I believe.
17x9.5 front (BFG KDW 275/45/17)
17x11 rear (Nitto DR 315/35/17)
doodad
06-18-2006, 02:33 PM
Good luck fitting a 335. :lol:
They can be fit, but you will need the fenders rolled!
I found the wheels from an EBay store.
TomZWheels has them for $850 a set right now I believe.
17x9.5 front (BFG KDW 275/45/17)
17x11 rear (Nitto DR 315/35/17)
oh come on man!!!! really? l thought maybe with those wheels, l would have problem to fit 335s.. so could you please explain me why excatly those tires wouldnt fit? would they touch the body?
They can be fit, but you will need the fenders rolled!
I found the wheels from an EBay store.
TomZWheels has them for $850 a set right now I believe.
17x9.5 front (BFG KDW 275/45/17)
17x11 rear (Nitto DR 315/35/17)
oh come on man!!!! really? l thought maybe with those wheels, l would have problem to fit 335s.. so could you please explain me why excatly those tires wouldnt fit? would they touch the body?
Mr. Luos
06-18-2006, 02:36 PM
Bingo.
The tire will fit the 11 inch wheel, but won't clear the cars body.
The tire will fit the 11 inch wheel, but won't clear the cars body.
doodad
06-18-2006, 02:39 PM
Bingo.
The tire will fit the 11 inch wheel, but won't clear the cars body.
so you are telling me, FORGET IT!!!
The tire will fit the 11 inch wheel, but won't clear the cars body.
so you are telling me, FORGET IT!!!
Mr. Luos
06-18-2006, 03:53 PM
You can do it.
But you need to roll the fenders.
Not 100% they will fit after that even.
But you need to roll the fenders.
Not 100% they will fit after that even.
doodad
06-18-2006, 04:02 PM
You can do it.
But you need to roll the fenders.
Not 100% they will fit after that even.
do you know anybody who has 335s?? any pics? how do they look ? also even if l roll the fenders, it will still rub right?
But you need to roll the fenders.
Not 100% they will fit after that even.
do you know anybody who has 335s?? any pics? how do they look ? also even if l roll the fenders, it will still rub right?
Mr. Luos
06-18-2006, 04:28 PM
I don't know.
Never seen it.
Never seen it.
Automotive Network, Inc., Copyright ©2024