Who would win?
|
|
KevinG 02-20-2006, 10:27 PM
The contendors: My 1996 3.8L V6 Camaro. This car has the 4L60E auto transmission. Mods include: Magnaflow Catback Carsound 3" High Flow Cat Converter PCM For less Custom Tune 4.10 Gears Auburn Pro Series LSD Custom CAI with K&N Filter VS. 2000 3.8L (190 hp) V6 Mustang. This car is has a manual transmission. Mods include: CAI Magnaflow Catback In a straight line, who has the edge? Anyone know the specs of this car, I beleive it is 190 hp? camaromaniac 02-20-2006, 10:28 PM you Genopsyde 02-20-2006, 10:30 PM camaro easily 97cavalier 02-20-2006, 10:33 PM ya you, thoes 4.10's will help you alot to. KevinG 02-20-2006, 10:33 PM Thanks, just needed some more reassurance. He says he forgot to say that he has headers, do I still take him? camaromaniac 02-20-2006, 10:47 PM you KevinG 02-20-2006, 10:54 PM Haha, thanks. How long would it take me to catch up to him if he got a good launch on his manual tranny? Genopsyde 02-20-2006, 10:56 PM i think your 4.10's will make up for that. Savage Messiah 02-21-2006, 12:18 AM you will fucking destroy him drvngstorm05 02-21-2006, 12:57 AM you'll take him easy wrightz28 02-21-2006, 10:57 AM 4.10s = torgque multiplication. Torque = motion. So long as you don't break the tires loose and just sit there smok'n, somebody's gonna get a nice view of the rear bumper on a camaro. silverado122775 02-21-2006, 11:11 AM Those Ford 3.8's really suck.. you should not have a problem wooping him. cooltc2004 02-21-2006, 11:12 AM How much do those 3.8L Mustangs really suck? Whats the Tq on those cars, and the weight? Link85x 02-21-2006, 11:18 AM 87 Iroc. Link85x 02-21-2006, 11:18 AM Just kidding. You'll take the cake. 4.10's are great. silverado122775 02-21-2006, 11:18 AM 2000 Ford Mustang V6 3.8L specs 3,797 cc 3.8 liters 6 V front engine with 96.8 mm bore, 86 mm stroke, 9.4 compression ratio, overhead valve and two valves per cylinder - Unleaded fuel - Fuel economy EPA highway (l/100km): 8.1 - Multi-point injection fuel system - Main 59 liter unleaded fuel tank - Power: SAE and 142 kW , 190 HP @ 5,250 rpm; 220 ft lb , 298 Nm @ 2,750 rpm Like I said the camaro will win wrightz28 02-21-2006, 11:33 AM 2000 Ford Mustang V6 3.8L specs 3,797 cc 3.8 liters 6 V front engine with 96.8 mm bore, 86 mm stroke, 9.4 compression ratio, overhead valve and two valves per cylinder - Unleaded fuel - Fuel economy EPA highway (l/100km): 8.1 - Multi-point injection fuel system - Main 59 liter unleaded fuel tank - Power: SAE and 142 kW , 190 HP @ 5,250 rpm; 220 ft lb , 298 Nm @ 2,750 rpm Like I said the camaro will win Well damn, you forgot to mention how many cup holders there are :thumbsup: Link85x 02-21-2006, 11:38 AM Cup holders??? What are those??? silverado122775 02-21-2006, 03:51 PM Damn!! my bad. I will be more specific next time. :) balls_to_the_wall 02-21-2006, 05:08 PM How much do those 3.8L Mustangs really suck? Whats the Tq on those cars, and the weight? How about a stock 89 150hp 4.3L s10 can beat one on the highway, been there, done that. *edit* it was a 95 mustang, although I think they have the same engine?? Rally Sport 02-21-2006, 05:36 PM Why is this even a question? KevinG 02-21-2006, 06:45 PM :-) Just had to make sure! drvngstorm05 02-21-2006, 07:24 PM lets put it this way, if he beats you, i'm gonna drive to wherever you are and slap you 97cavalier 02-21-2006, 07:29 PM hey drvngstorm, what is the hp numbers on you car? i saw all of your mods and was wondering how much hp and torque you have. ridge_runner 02-22-2006, 03:30 AM hey drvngstorm, what is the hp numbers on you car? i saw all of your mods and was wondering how much hp and torque you have. hes pushin 237 to the wheels on a cold day!! :grinyes: 97cavalier 02-22-2006, 12:40 PM for real? it has to be more than that right? will all of thoes mods i was thinking close to 300. silverado122775 02-22-2006, 01:28 PM for real? it has to be more than that right? will all of thoes mods i was thinking close to 300. at the crank he is pushing 300hp. you have to figure 20-30% is lost by the time it gets to the wheels drvngstorm05 02-22-2006, 04:09 PM hey drvngstorm, what is the hp numbers on you car? i saw all of your mods and was wondering how much hp and torque you have. haven't been to a dyno, but i've had several people give me a range of 375 to 425... not sure, but i've beat cars that are rated at 400 and 405 hp so i think that range is pretty good... cuda_dude 02-22-2006, 04:38 PM at the crank he is pushing 300hp. you have to figure 20-30% is lost by the time it gets to the wheels about 15% for a T-56 bag91 02-22-2006, 06:53 PM 15%.....that kinda sucks..... Savage Messiah 02-22-2006, 08:12 PM 15% drivetrain loss ain't bad ROUDA 02-22-2006, 09:39 PM how much tourqe is a stock 3.8 camaro have 200hp right Savage Messiah 02-22-2006, 10:07 PM a stock buick 3800 series II is 200 HP and 225 TQ but understand that the ford 3.8, no matter what its power rating is, is a complete friggin dog. silverado122775 02-23-2006, 10:26 AM Has KevinG raced the Ford yet? KevinG 02-23-2006, 04:04 PM I'm waiting on my chip from PCMforless. I got the gears done yesterday, but I can't light her up until I fix the speedo and shift point issues. The chip should be here tomorrow! silverado122775 02-23-2006, 04:08 PM Cool.. let us know how you did. KevinG 02-23-2006, 04:16 PM Oh and guess how much this shop charged me to do the gears/differential/install kit? $155 including the lube for the axle!!! I got an awesome price for it. FormulaLT1 02-23-2006, 05:23 PM Thats a sweet deal right there. I have heard a few people getting similiar but way too many paying 3 times thats. tcfco2005 02-23-2006, 06:09 PM damn that is a deal...ya i was quoted 400 just for the damn labor... 97cavalier 02-23-2006, 07:24 PM i was quoted 120 for gears and $50 an hour for labor. Related Links Enter the largest automotive community on the planet! |
