1996 Roadmaster ignition wires
Gerald Mezzoni
01-26-2006, 05:42 AM
Is it difficult to change the ignition wires on a 1996 Roadmaster with the 350LT1 engine? It looks like they plug into the side of the crank housing. Mechancis want at least 5 hours labor. Thanks, Gerry
buffman
01-30-2006, 01:44 AM
They plug into the optispark (distributor) on the front of the engine. Driver's side is pretty easy, but even with headers, it took me almost 3hrs to change the passenger side. They route between the AC compressor and accessory bracket.
Matt
Matt
Windssurfer
02-12-2006, 08:44 PM
I have not tried this but have heard the easiest way to change the pass. side plugs is thru the wheel well with a really long extension.
Automotive Network, Inc., Copyright ©2024