2002 sunfire GT 2.4 no headlights
|
|
2002 sunfire GT 2.4 no headlights thunderace13 12-20-2005, 11:13 PM
I just recently had a bad front wiring harness on my 2002 sunfire gt 2.4. After I replaced the bad wire and reinstalled the harness, I had headlights, but the turn signal lights on the dash were always on. The next day I was driving home from work and I had no low/high beams and the DRL were on only (even with headlight switch on). The turn signals were acting funny, but then finally just stopped working. I tested the wiring harness for shorts and good continuity to the connector in the engine compartment. I have replaced all lights also. Any suggestions? RahX 12-20-2005, 11:36 PM check, double check, triple check grounds. it could be your turn signal switch too. thunderace13 12-20-2005, 11:45 PM I also checked the multi-fuction switch. thunderace13 12-20-2005, 11:46 PM check, double check, triple check grounds. it could be your turn signal switch too. I checked all the grounds and all leads for all the lights for a short to ground. Still nothing. thunderace13 12-31-2005, 12:35 AM I checked all the grounds and all leads for all the lights for a short to ground. Still nothing. Took it to a good friend that is an automotive specialist and one of the Chasis grounds were not good enough. He ohmed out every wire and finally just on a whim he added a body or chasis ground to the battery and fixed it for now. Now I have a check engine light and I believe it is probably a EVAP problem. Going to have it scaned this weekend to find out and fix the final problem!! maureen0312 03-05-2006, 03:16 PM Did you figure out what the issue was with the headlights? Having the same issue right now. Headlights are barely on. Battery and alternator tested fine. Any help is appreciate! -Maureen thunderace13 06-21-2006, 11:40 PM Did you figure out what the issue was with the headlights? Having the same issue right now. Headlights are barely on. Battery and alternator tested fine. Any help is appreciate! -Maureen First it was the faulty front wiring harness and then they added a body ground in front. I still have a check engine light for an EVAP problem that I have to check into. I have a feeling it is a grounding problem also. Related Links Enter the largest automotive community on the planet! |