I have a 3 inch downpipe with a 2.75 inlet. My friend said I would need a V clamp to fit it to the turbo(i have t25). What size clamp should I get to fit the stock turbo and where would I get this from?

Well, Mike got a DP with a ~2.75" opening and it bolted right up to his 14b, I think it should be just fine on the t25.

Well, Mike got a DP with a ~2.75" opening and it bolted right up to his 14b, I think it should be just fine on the t25.


cooool, thanks!