If any of you have or know of a faq thread that needs to be added to the blazer faq and how to section just post it up here and I will get it added to the new thread.

Please post a link to it and I would prefer that it does not link to another website. But if it is a really good faq or how to and it links to another website I will consider putting it up anyway.

John

How about adding this thread as a link?

.3 CPI Injector replacement (http://www.automotiveforums.com/vbulletin/showthread.php?t=473110&highlight=4.3+CPI)

Here's another door hinge pin and bushing how to, it's got a little more detail than the current one:
http://www.automotiveforums.com/vbulletin/showthread.php?t=476619

We see a lot of CPI problems here. Here's a thread with info about it:
http://www.automotiveforums.com/vbulletin/showthread.php?t=462726
Here's one with some great pics:
http://www.automotiveforums.com/vbulletin/showthread.php?t=473110 (http://www.automotiveforums.com/vbulletin/showthread.php?t=473110) <--- EDIT nevermind you posted that one while I was typing.

Cluster Mod how to:
Convert Your Cluster & Control lights to LED's How-to! (http://www.automotiveforums.com/vbulletin/showthread.php?t=379971)

Drum to Disc Brake how to:
Drum to Disc brake rear end swap how-to! (http://www.automotiveforums.com/vbulletin/showthread.php?t=372515)

Heated seat how to:
Hot butt how-to! (http://www.automotiveforums.com/vbulletin/showthread.php?t=366533)

Factory fog light switch with after market fog lights how to:
Factory fog lamp switch with non factory fog lamps. (http://www.automotiveforums.com/vbulletin/showthread.php?t=356665)

Info about common tranny problems:
Transmission Problems: Common Issues and Solutions (http://www.automotiveforums.com/vbulletin/showthread.php?t=461182)

Low speed ABS activation:
Read for Help **ABS Activation At Low Speeds** (http://www.automotiveforums.com/vbulletin/showthread.php?t=425516)

96+ Hard start, no start, rough idle info:
96+ Hard Start, No Start, Rough Idle Info (http://www.automotiveforums.com/vbulletin/showthread.php?t=450484)

List of RPO codes:
**List of RPO Codes** (http://www.automotiveforums.com/vbulletin/showthread.php?t=450285)

A little info about fuel trims:
A Little Info About Fuel Trims (http://www.automotiveforums.com/vbulletin/showthread.php?t=429831)

Purging air from your cooling system:
Got air in your heater core? Need help getting rid of it? (http://www.automotiveforums.com/vbulletin/showthread.php?t=469926)

Water cylinder decarbonization:
Water Cylinder Decarbonizing... Should I? (http://www.automotiveforums.com/vbulletin/showthread.php?t=283211)

More to come that's all I could remember right now, but I know that a lot of guys have posted some great info on here, so I'll keep looking.

How about adding this thread as a link?

.3 CPI Injector replacement (http://www.automotiveforums.com/vbulletin/showthread.php?t=473110&highlight=4.3+CPI)


Done.

The pictures in that thread aren't working for me though :sly:

John

Done.

The pictures in that thread aren't working for me though :sly:

John

Anyone else having this problem? I'd like to know if so, I'd try a different host.

Done.

The pictures in that thread aren't working for me though :sly:

John
The pics are working for me. If you have a problem with pics loading, usually clicking reload will work. The forum has had a problem loading some off site pics lately.

blazee I merged your post into the working FAQ I may have some time to work on it tomorrow.

Thank you for putting those together.

John

blazee I merged your post into the working FAQ I may have some time to work on it tomorrow.

Thank you for putting those together.

John
You're welcome.

Thank you for organizing the forum.

Most of this stuff also applies to S10's, so could you possibly paste a copy in there as well.

Thanks.

and thanks Brian

Most of this stuff also applies to S10's, so could you possibly paste a copy in there as well.

Thanks.

and thanks Brian

Done :sunglasse

John

Done :sunglasse

John


Thanks John

Most of this stuff also applies to S10's, so could you possibly paste a copy in there as well.

Thanks.

and thanks Brian

You're welcome. It's very good Shortbus has made time for this.

Ignition Switch replacement procedure (http://www.automotiveforums.com/vbulletin/showthread.php?t=287636)

First Gen Instrument Cluster Conversion (http://www.automotiveforums.com/vbulletin/showthread.php?t=489642) (covers removal and installation, too)

We need a technical 4x4 explanation. My guess is that the encoder motor moves a shift mechanism,which trips the vac switch to send vacuum to actator which then pulls cable to engage front axle. I'd appreciate if someone can do a write up on this. What voltages should you see at the encoder motor? how to test the encoder motor? what sensors are there to sense if it is in 2wd or 4wd. Is there a sensor to confirm front axle engagement? How to troubleshoot front hub engagement.

We need a technical 4x4 explanation. My guess is that the encoder motor moves a shift mechanism,which trips the vac switch to send vacuum to actator which then pulls cable to engage front axle. I'd appreciate if someone can do a write up on this. What voltages should you see at the encoder motor? how to test the encoder motor? what sensors are there to sense if it is in 2wd or 4wd. Is there a sensor to confirm front axle engagement? How to troubleshoot front hub engagement.


Heres the best web page that I've seen on that subject
http://www.4x4posi-lok.com/PDFs/TSG_chevyT.pdf

Ignition Switch replacement procedure (http://www.automotiveforums.com/vbulletin/showthread.php?t=287636)

First Gen Instrument Cluster Conversion (http://www.automotiveforums.com/vbulletin/showthread.php?t=489642) (covers removal and installation, too)


Done. :)

As suggested by another member


http://www.automotiveforums.com/vbulletin/showthread.php?t=495267

As suggested by another member


http://www.automotiveforums.com/vbulletin/showthread.php?t=495267

Done.

I'm getting really frustrated at how slow Af has been lately, I would be able to do more but it really pisses me off when AF freaks out and loses my changes that I've made. Igor says he will be making some changes soon and I hope to corner him about changes to GM once again. Who knows when that will happen though.

On a positive note I did get the FAQ updated to a more user friendly interface. I just still need to add the rest of the links.

Keep them coming as you find them.

Thanks everyone for the help with this.

John

I like the new layout. I edited the links in my first post to show the thread names instead of the urls, I thought that it might help you out a little when you merge them into the catergories.

A couple other suggestions:
Add a list of or link to the forum guidelines.

A statement to search the forum if the help needed isn't found in the FAQs and How-tos.

A list of what to include in threads asking for help..... Year? Engine? Is the Check engine light on? Detailed description of the problem? What has been attempted to fix it? etc.

I haven't looked at what you've done blazee, but I agree with you on the sugestions.

I'd also like to see a link to the buy and sell section. Then theres no excuse for posting items on this board. It is hard to find if you don't know where to look

That's a good idea.

It would also be nice to have the thread in the Jimmy and Sonoma forums too. Possibly the Bravada and Hombre forums, as well.

That's a good idea.

It would also be nice to have the thread in the Jimmy and Sonoma forums too. Possibly the Bravada and Hombre forums, as well.

Sure I can do that right now it's easy enough.

John

Sure I can do that right now it's easy enough.

John

Nice. :thumbsup:

Thanks Shortbus!

It's looking good. Thanks again for taking the time to get everything organized.

I'd also like to see a link to the buy and sell section. Then theres no excuse for posting items on this board. It is hard to find if you don't know where to look

Added at top of page :icon16:

I like the new layout. I edited the links in my first post to show the thread names instead of the urls, I thought that it might help you out a little when you merge them into the catergories.

A couple other suggestions:
Add a list of or link to the forum guidelines.

A statement to search the forum if the help needed isn't found in the FAQs and How-tos.

A list of what to include in threads asking for help..... Year? Engine? Is the Check engine light on? Detailed description of the problem? What has been attempted to fix it? etc.

Could you create the page the way you want it to read and I will copy and paste it into the current FAQ?

If you want create a new topic on it and we can discuss it and fine tune before making it live on the Faq, that way you can get the credit for the post. I think its a great idea to have a general how to post faq.

Good idea :smile:

John

Once this Faq is completed in blazer I will copy it to the other forums so they are all the same.

I love it Shortbus;

You've sure put a lot of effort on the new FAQ secton.

No problem happy to help, I know I have been absent around here as a mod for almost 2 years but my work was busy at Caterpillar and know that i changed jobs again I have more time to goof on AF during work.

Blazee, I really like your introduction to AF. Very well done

Blazee, I really like your introduction to AF. Very well done
Thanks. :smile:

I hope that it helps.

I don't remember who started it, or the name of the thread but someone started a member introduction thread 2 or 3 months ago.

I know that it isn't car related, but it would almost be nice to have as a sticky. It was nice seeing a little of what everyone is like.

Here's another one for you:

96+ Water Pump Replacement (http://www.automotiveforums.com/vbulletin/showthread.php?t=498467)

Here's another one for you:

96+ Water Pump Replacement (http://www.automotiveforums.com/vbulletin/showthread.php?t=498467)

Done

Thanks again Shortbus.


A couple more from laxman21 :)

How to: replacing the 4x4 front differential actuator (http://www.automotiveforums.com/vbulletin/showthread.php?t=498812)

Vacuum Hoses on 4.3 TBI replacement (http://www.automotiveforums.com/vbulletin/showthread.php?t=498411)

http://www.automotiveforums.com/vbulletin/showthread.php?p=3678681

Thats a good read their.

http://www.automotiveforums.com/vbulletin/showthread.php?t=498812

Tells about that 4x4 problem in first gens, thought i pass these along.

http://www.automotiveforums.com/vbulletin/showthread.php?p=3678681

Thats a good read their.

http://www.automotiveforums.com/vbulletin/showthread.php?t=498812

Tells about that 4x4 problem in first gens, thought i pass these along.

Read the post right above yours. :rolleyes: :loser: :p :lol:

Thanks again Shortbus.


A couple more from laxman21 :)

How to: replacing the 4x4 front differential actuator (http://www.automotiveforums.com/vbulletin/showthread.php?t=498812)

Vacuum Hoses on 4.3 TBI replacement (http://www.automotiveforums.com/vbulletin/showthread.php?t=498411)


Done... your welcome.

lol i didnt see it that was scary :loser: :naughty:

lol i didnt see it that was scary :loser: :naughty:
:screwy:
No prob, just messing with you a little bit. :loser:

I think it was i was reading the other FAQ didnt see it so i though hum i should put this in suggestions but i dont remember seeing your post because i had a catalytic converter post open in the 3 rd window lol and i got v8 on the mind

Shortbus

How about something on the intake manifold gaskets. I remember reading a thread awhile back that had the whole procedure with pictures. I had printed it and used itmyself, and today I've been looking for it and can't find it again. I've been searching for it all day. this info may help some others out. I'm gonna keep looking. Great job with this Fag thread, saves a ton of time.

thanks
JKdon

JKdon, you may want to reread your post and edit. :icon16: Just a little mistype there, it's actually kind of funny.... :p :p :thumbsup:

Shortbus

How about something on the intake manifold gaskets. I remember reading a thread awhile back that had the whole procedure with pictures. I had printed it and used itmyself, and today I've been looking for it and can't find it again. I've been searching for it all day. this info may help some others out. I'm gonna keep looking. Great job with this Fag thread , saves a ton of time.

thanks
JKdon

:lol:

http://www.automotiveforums.com/vbulletin/showthread.php?t=486234

Fag thread LOL.

I love it!

:lol:

http://www.automotiveforums.com/vbulletin/showthread.php?t=486234

Added

Added

:thumbsup: Thanks again.

I didn't see it when it was posted or I would have recommended it, it's a good thing that jkdon said something.

Nice Job Cailen.

i got 2 for u to add Shortbus, both by our budy rlith;

- How-to change the PITA #3 spark plug
http://www.automotiveforums.com/vbulletin/showthread.php?t=503231
- Another CPI How-to (focus on regulator)
http://www.automotiveforums.com/vbulletin/showthread.php?t=503238

i got 2 for u to add Shortbus, both by our budy rlith;

- How-to change the PITA #3 spark plug
http://www.automotiveforums.com/vbulletin/showthread.php?t=503231
- Another CPI How-to (focus on regulator)
http://www.automotiveforums.com/vbulletin/showthread.php?t=503238

Ok I got them added thank you.

Here's a couple more for you:

Heater System: Information, Troubleshooting, And Repair (http://www.automotiveforums.com/vbulletin/showthread.php?t=503195)

Steering System: Information, Troubleshooting, and Repair (http://www.automotiveforums.com/vbulletin/showthread.php?t=503647)

Ok done deal. Guess I need to update the other S & T body forums to.

how about this thread Shortbus
http://www.automotiveforums.com/vbulletin/showthread.php?p=3715890

I know that it isn't a comon problem but still think that it deserves a place in the body section. plus most internal cab leaks are caused by blockage

heres another one for ya. its a how-to by rlith about steering slop.
http://www.automotiveforums.com/vbulletin/showthread.php?t=510605

heres another one for ya. its a how-to by rlith about steering slop.
http://www.automotiveforums.com/vbulletin/showthread.php?t=510605

Done.

http://www.automotiveforums.com/vbulletin/showthread.php?t=379971&highlight=convert+cluster

What about that didnt notice that in the Interior section of the FAQ another nice one by Rlith back in the day.

I was wondering if you could put a link to a good A/C component break down and the procedures for diagnostics.
Also I have the Electronic Climate Controles on my 98 Blazer, that would be a very interesting topic. The thing sure is acting weard...when the truck is running I can hear the actuator trying to move the a/c\heater vent to heat when it is already in heat...i know its in the electronic module in the switch.
I can not get it to go to cold unless I pinch one of the tubes connected to the vacume manifold under the dash.....I am also losing r-134 somewere but I cannot find the leak. Ive used dye and still cant find the leak...I hope I didnt go to far off topic...if soo...sorry.
PS....Best s10 site I have ever found....all the others argue and dis eachother...keep up the good work.

http://www.automotiveforums.com/vbulletin/showthread.php?t=379971&highlight=convert+cluster

What about that didnt notice that in the Interior section of the FAQ another nice one by Rlith back in the day.

Done :sunglasse

I was wondering if you could put a link to a good A/C component break down and the procedures for diagnostics.
Also I have the Electronic Climate Controles on my 98 Blazer, that would be a very interesting topic. The thing sure is acting weard...when the truck is running I can hear the actuator trying to move the a/c\heater vent to heat when it is already in heat...i know its in the electronic module in the switch.
I can not get it to go to cold unless I pinch one of the tubes connected to the vacume manifold under the dash.....I am also losing r-134 somewere but I cannot find the leak. Ive used dye and still cant find the leak...I hope I didnt go to far off topic...if soo...sorry.
PS....Best s10 site I have ever found....all the others argue and dis eachother...keep up the good work.

I'll keep my eye out for such a topic or thread.

Thank you for the complement, its the members in here that make it what it is.

Not the best gramer in the world (sorry) but does this one qualify?
how to improve your ride quality
http://www.automotiveforums.com/vbulletin/showthread.php?p=3876616#post3876616

Not the best gramer in the world (sorry) but does this one qualify?
how to improve your ride quality
http://www.automotiveforums.com/vbulletin/showthread.php?p=3876616#post3876616

Done

Thanks Blazee

I know its not our board but http://www.sytyarchives.com/howto/viewarticle.php?article_name=heater_core.php&dir=climate_controls

i think that should be in the FAQ. It comes from time to time on the first gens and heater cores and i think that be a good outside link/reference that could be used here.