91 PA failed emissions
volkerc
11-07-2005, 12:26 PM
Failed emissions today.Anybody knows any tricks?
o2 sensor and pcv valve new, airfilter clean, spark plugs are nice. passed at regular idle but failed at high rpm???
ideas anybody?
o2 sensor and pcv valve new, airfilter clean, spark plugs are nice. passed at regular idle but failed at high rpm???
ideas anybody?
maxwedge
11-07-2005, 12:44 PM
What part of the emissions fiailed waht passes and what were your readings? Your question is to general, no info provided.
volkerc
11-07-2005, 04:22 PM
What part of the emissions fiailed waht passes and what were your readings? Your question is to general, no info provided.
co2 to high at raised idle. test was to be run at 3000 rpm and should have been no more than 0.30 co2, reading was 0.50
co2 to high at raised idle. test was to be run at 3000 rpm and should have been no more than 0.30 co2, reading was 0.50
HotZ28
11-07-2005, 06:17 PM
Put four bottles of "HEET" in about 10 gal of gas before it is tested. On a non-modified engine in good tune, all you need is HEET!
maxwedge
11-07-2005, 06:38 PM
Put four bottles of "HEET" in about 10 gal of gas before it is tested. On a non-modified engine in good tune, all you need is HEET!
You "gas" cheater, what's this, from the "gasser wars".!! Former NHRA recorder holder here, 426 Ramchager 64 Belvedere, A/SA. Boy do I miss it!!
You "gas" cheater, what's this, from the "gasser wars".!! Former NHRA recorder holder here, 426 Ramchager 64 Belvedere, A/SA. Boy do I miss it!!
HotZ28
11-07-2005, 07:27 PM
Yea, back during the "gasser wars", before money could buy horsepower, we had to improvise, adapt and overcome! Ever try Toluene with H&H?
Former G/G F/G E/G Corvette, NHRA Division 1 "Busters Rebels".
Retired, but can still involved with Pro Mod 38 Chevy, Blown-Alcohol, 4.18 1/8th @ 189
I will be involved till the grave digger comes looking for me!! :iceslolan
Former G/G F/G E/G Corvette, NHRA Division 1 "Busters Rebels".
Retired, but can still involved with Pro Mod 38 Chevy, Blown-Alcohol, 4.18 1/8th @ 189
I will be involved till the grave digger comes looking for me!! :iceslolan
maxwedge
11-08-2005, 05:24 PM
Div 1 , me too ran at Raceway Park, Atco, Yprk, Maple Grove, Island. early 70's to about 88. Blue and white Plymouth, Domini and Shepherd.
HotZ28
11-08-2005, 08:30 PM
Sorry, I meant to say Division II (Southeast) :redface: :bricks1:
The Plymouth guys down here were Bagwell, Barnett, Kinnett & Whisnet, to name a few. I had a shop with several Hemi SSA/A cars scattered around the building. I love those as well; however I stuck with the small & big block Chevy's. When I get the urge to feel the power again, (nice days only) I knock the cobwebs off of my Z28 & take it up to Atlanta Raceway for a few blast down the track. Still use some Toluene and timing retard to ward off detonation when I hit the juice. Day to day, I am satisfied with a Park Avenue Ultra with a 2.2 in. blower pulley. (Soft ride & 0 to 60 in 4.8) :iceslolan
I wonder if Volkerc has passed emissions yet? :confused:
:cya:
The Plymouth guys down here were Bagwell, Barnett, Kinnett & Whisnet, to name a few. I had a shop with several Hemi SSA/A cars scattered around the building. I love those as well; however I stuck with the small & big block Chevy's. When I get the urge to feel the power again, (nice days only) I knock the cobwebs off of my Z28 & take it up to Atlanta Raceway for a few blast down the track. Still use some Toluene and timing retard to ward off detonation when I hit the juice. Day to day, I am satisfied with a Park Avenue Ultra with a 2.2 in. blower pulley. (Soft ride & 0 to 60 in 4.8) :iceslolan
I wonder if Volkerc has passed emissions yet? :confused:
:cya:
volkerc
11-09-2005, 01:16 AM
I wonder if Volkerc has passed emissions yet? :confused:
:cya:
yes it's done, thanks.
:cya:
yes it's done, thanks.
Automotive Network, Inc., Copyright ©2024