Ok so I have several pdf factory manuals but for the life of me I can't find a pin out of the interior wiring harness from the ecm to every other thing on the inside. Also have a problem finding the altenator wire on the outside harness ( seems I'm missing one wire no matter how I read the underhood pin out) so I need to run a new set for the alt to the gauge pannel since this was originally a NA body and I'm still using the NA gauge cluster.
And lastly if anyone has a complete vaccum diagram rats nests are welcome but I'd like to see a clean view of the lines also, I would be ever so greatfull.

What is it that your tryin to troubleshoot?

Trying to rewire the interior harness and run all my vaccum lines on the engine.

i take it you have an FC?

I dont know if this will help but:

http://www.turborx7.com/rx7vacuum.htm

Those would be what I need but for a 13bt instead of the brew. Thanks for the link though.

So I think I have all the lines locations except one lead thats on the lim just under the uim the one to the front of the engine. I was wondering if anyone knew if this can be blocked off or does it need a line running to it?

www.iluvmyrx7.com go to 2nd gen.things to read. or manual sumthin like that, should have everything u need