Our Community is 940,000 Strong. Join Us.


92 s10 blazer 4.3v


ddjaa
10-28-2005, 06:43 PM
92 blazer 4.3v
Hey, just found out that gap setting was .060 instead of .045. Can't always trust what you hear. Would this cause it to start hard and run poorly at slow speeds, sluggish to accl. but improve at interstate speeds.Let me know all the details so I can stop troubleshooting my problems. Ohh hard to start too.

Gabe25
10-28-2005, 07:22 PM
What type of plugs are you using?

ddjaa
10-28-2005, 08:01 PM
What type of plugs are you using?
ac-delco-please don't tell me they are set at .045

Gabe25
10-29-2005, 08:57 PM
Your gap should be at 0.45. I have a "94" and I'm running AC Delco's. My gap is 0.45 and I just bump the starter in the morning and she fires right up. The info you was readingis for actually the "95".s and up.

93LT
10-29-2005, 09:30 PM
Do you have an emissions label on your radiator support? It will have the timing and plug gap info printer on it.

My 1993 4.3 “W” CPI motor is supposed to be set at .045 according to my emissions label. I too use AC-Delco plugs, and it starts right up.

What engine, other than 4.3, do you have? What is your 8th digital in your VIN, Z or W?

Rmbodie
10-30-2005, 12:51 AM
The only engine offered after 89 is the 4.3.

93LT
10-30-2005, 05:06 AM
The only engine offered after 89 is the 4.3.


I'm asking if it is the TBI or CPI, hence the "8th" character in the VIN, W for CPI and Z for TBI. It is entirely possible that each could have a particular plug gap.

ddjaa
10-30-2005, 08:34 AM
I'm asking if it is the TBI or CPI, hence the "8th" character in the VIN, W for CPI and Z for TBI. It is entirely possible that each could have a particular plug gap.
Yes it is a W or cpi, but won't know the diff. Label is missing, already changed the gap back. Would like to know if the TPS could cause this symptom and if so is there a way to check it? Would like to say thanks to all who's trying to get my wheels running like yours,ha ha, no chance mines a bug that just gets me to work.Used to work all the time on carbed cars just never kept up with the change so pretty much lost.Oh, no I wasn't around with the horse and bugy, not that old.

rlith
10-30-2005, 09:20 AM
The only engine offered after 89 is the 4.3.

Actually the 2.5 and 2.8 were offered through 94 on the blazer

Rmbodie
10-31-2005, 12:15 AM
I guess my books are wrong then . Rob

erhit6874
12-04-2007, 03:28 PM
I have a '92 S10 Blazer 4.3 TBI and the gap according to original specs is .035

old_master
12-04-2007, 07:49 PM
I have a '92 S10 Blazer 4.3 TBI and the gap according to original specs is .035

HI and welcome to the forum! If you would like to start a new thread, here is a link: http://www.automotiveforums.com/vbulletin/newthread.php?do=newthread&f=2072

This thread is over 2 years old, please don't post in old threads.
Thanks

Add your comment to this topic!