Our Community is 940,000 Strong. Join Us.


94 s-10 blazer vacuum ball position.


terry316
10-22-2005, 11:37 PM
i just recieved a 94 s-10 blazer that had been wrecked on drivers side front and they had started taking it apart to replace fenders, etc. i guess for what ever reason they pulled the vacuum ball out and put it in the floor of blazer. my question is where does it go and where does the single vacuum hose connect to. i would hate to buy service manual for this one thing. any help is appreciated. thanks

rlith
10-23-2005, 06:45 AM
i just recieved a 94 s-10 blazer that had been wrecked on drivers side front and they had started taking it apart to replace fenders, etc. i guess for what ever reason they pulled the vacuum ball out and put it in the floor of blazer. my question is where does it go and where does the single vacuum hose connect to. i would hate to buy service manual for this one thing. any help is appreciated. thanks

If it's the large one, it mounts to the passenger side inside fender hump, if it's the smaller one, it mounts on the driver's side hood.

terry316
10-23-2005, 08:18 AM
thanks rlith and it is the large one i think and i do see a place for it on passenger side. does it connect to any certain place or just tie into the vacuum system anywhere.

rlith
10-23-2005, 08:19 AM
there should be a hose that connects to it...Look for one flopping around.

terry316
10-23-2005, 10:07 AM
there is a hose on the ball i just need to know if it has any certain place to go or can it just be connected to a tee somewhere.
by the way do i even need it?

rlith
10-23-2005, 04:38 PM
There should be a hose going from the ball to a t on that side of the car. You need it for proper vaccume and hvac controls.

Add your comment to this topic!