2003 Windstar front rotor removal
abl56
10-16-2005, 09:38 PM
How is this rotor removed? Is there a center bolt or does it just pull off, push on, etc??
ruggratt
10-17-2005, 06:53 AM
How is this rotor removed? Is there a center bolt or does it just pull off, push on, etc??
Well on my 1996 they just pull off, so I would guess yours do the same. After you remove the brake caliber of course.
Well on my 1996 they just pull off, so I would guess yours do the same. After you remove the brake caliber of course.
lewisnc100
10-17-2005, 07:28 AM
On the 99+ Windstars the OEM rotors are held on by 3 torx bolts. You can see them in this diagram:
http://groups.msn.com/FordWindstar/shoebox.msnw?action=ShowPhoto&PhotoID=37
http://groups.msn.com/FordWindstar/shoebox.msnw?action=ShowPhoto&PhotoID=37
DRW1000
10-17-2005, 08:21 AM
If you are replacing the rotors with aftermarkets the new rotors may not have the 5 holes for the 3 bolts (2 holes are not used). If this is the case then do not worry about the bolts. The brakes and wheels will hold everything in place similar to RWD rear drums.
Automotive Network, Inc., Copyright ©2024