quick question about TORX sizes

does any1 know the TORX size of the bolts for the seatbelts, and also the rear cargo supports?

the seatbelts are an oddball size of T47, most a-z stores wont know what the hell your talken about, you will need a hardware store, T45 is to small they will round out, T50 is to large, my suggestion is to get the oxi torch, heat up the nut (welded to body) on the bottum, it is a bitch to get out, even if its been out b4, a few months help it rust right back in to place, not to hot, you have carpeting right above and good luck finding the T47

http://cgi.ebay.com/STAR-SOCKET-TORX-SOCKET-SIZE-T47_W0QQitemZ4350685593QQcategoryZ20773QQssPageNam eZWD1VQQrdZ1QQcmdZViewItem

Thats what he needs right dmbrisket?I did a quick ebay search

yes sir that is correct

Thank goodness for ebay.

Seatbelts, and cargo are T50, NOT t47

go buy a master torx set from Sears. Its about $30 but it has all torx sizes and comes in very handy when working on GM vehicles.

my seatbelts were t47, and so was my seat, and the buckets in the jimmy i took the buckets from, and the seat belts in the jimmy (98 truck, 97 jimmy)

my seatbelts were t47, and so was my seat, and the buckets in the jimmy i took the buckets from, and the seat belts in the jimmy (98 truck, 97 jimmy)

try slipping a 50 in there. I've never in my life removed a seatbelt bolt or cargo mat (and yes, ive removed a lot) without a t50...