hi i have a 1988 beretta with a 2.8 litre v6. This car is not getting any spark it is getting fuel but no spark. i have replaced the control module and coil packs, the crank sensor, and the computer still no spark. i have checked all fuses and replaced still no spark iam at my wits end any help would be appreciated thanks in advance

would think maybe there was a broken wire between computer and module, maybe a bad ignition switch, or, perhaps a defective module. Rare, but not unheard of. Might take the module back to where you bought it for a test. Otherwise I have no idea why this car is not firing. Might have to invest in a Haynes manual or GM service manual to help track down problem... especially if you have to go hunting down broken wires. Perhaps someone here could advise how to bypass the switch, just in case?? I know on a lot of Blazers that was a problem.

try replacing computer, thats what ended up being wrong with mine.