Ok I know I'm supposed to remove pin #10 but can anybody tell me what color it is, or provide me with the pinout chart?
TIA

I have the 2000 Camry Repair Manual in front of me.

Looking at the DRL Relay from the wire harness side the terminals are as follows:

11-10-9-8-7 Gap 6-5-4-3-2-1
25-24-23-22-21-19-18-17-16-15-14-13-12

(12 is adjacent to 1) (25 is adjacent to 11)

When I disconnected the DRL on my 2000 Camry, I found which wire it was and cut it, and connected a wire to each end and put a switch in the panel right next to the aux power adapter, just above the front of the center console. (below the ashtray) I've found I use the DRL most of the time, but I do like having the ability to turn them off.

I have the 2000 Camry Repair Manual in front of me.

Looking at the DRL Relay from the wire harness side the terminals are as follows:

11-10-9-8-7 Gap 6-5-4-3-2-1
25-24-23-22-21-19-18-17-16-15-14-13-12

(12 is adjacent to 1) (25 is adjacent to 11)

When I disconnected the DRL on my 2000 Camry, I found which wire it was and cut it, and connected a wire to each end and put a switch in the panel right next to the aux power adapter, just above the front of the center console. (below the ashtray) I've found I use the DRL most of the time, but I do like having the ability to turn them off.

Thanks, I'll probably run a switch too but not sure yet. Can you Please do one more thing? Can you give me the color code of the wire, I just want to make sure 100% it's #10.
Thanks again

anyone have the wire color for wire #10?

anyone have the wire color for wire #10?

Please :smile:

I Still need to know the color. Anyone?