|
|
K&N FIPK for 8.1dcg 10-06-2005, 01:25 PM Has anyone installed the K&N FIPK on an 8.1? I have a 2004 2500HD that I would like to add this to and I was wondering if there are any modifications necessary. Is the MAF sensor affected? Thanks spackelman 10-16-2005, 10:37 AM I have a 2002 2500HD, 8.1, allison trans, crew cab full box. Installed the K and N kit about 6 months ago (pd about $220). Nice difference in sound and low end pull. No significant increase in gas mileage. What happens to me is when I open it up at low speeds, my ses light comes on. Went to the dealer 3 or 4 times. The code was always the maf sensor. I posted a thread on this forum. Finally, a tech at my dealer told me that due to execssive oil applied at the factory on the new filter, the added vacumm pulls a little of this oil through the element and collects on the maf, which triggers a the ses light. Not a major problem, just annoying. The light goes off after a while. I recently cleaned the filter and did not re-oil it. I'll see what happens. I'm thinking about removing the maf screen. spackelman 10-16-2005, 10:41 AM By the way, the kit bolts right in. No modificatios are needed. Just watch the clearence between the fan shroud and the new intake tube. kenny-1907 10-16-2005, 03:02 PM You do know that the oil is there to help stop dirt right ? spackelman 10-17-2005, 06:23 AM Yea, I know. I want to see if it stops triggering the ses light. vBulletin®, Copyright ©2009, Jelsoft Enterprises Ltd.
Automotive Network, Inc., Copyright ©2009
|