95 Sebring
dukester56
09-29-2005, 08:57 PM
I have a 1995 Sebring with a 2.5 v-6. The engine runs fine up to approx. 2200 rpm at which point it starts to run on 3 cylinders until approx. 3400 rpm. At this point the engine smooths out again. The car is currently in the shop (non chrysler) where it has been for 6 weeks. The mechanic has checked wiring, sensors and changed the "computer" out 3 times. Nothing has helped. The mechanic has stated that the car is running lean.
Any suggestions would be appreciated short of torching it.
Thanks!
Any suggestions would be appreciated short of torching it.
Thanks!
Automotive Network, Inc., Copyright ©2024