These ride just like stock, except when you get on a rough rode and it is a little bouncy, but very minimal.
Not sure how low it is exactly but my camber is negative 1 degree all the way around except the front right tire is negative 1.6 degree. I did Specialty Products Camber Kit in the front and 2 washers with stock bolts in the rear.
Let me know what you think...

What should i do next!?!? System? Exhaust?

Heres some pics

http://www.imagestation.com/picture/sraid19/pcfad1c255875ad2b37dd0d0f85ee9695/fdc18d28.jpg

http://www.imagestation.com/picture/sraid19/pe10677e8e42ee3c7201cc4be1b89cb47/fdc18cd7.jpg

http://www.imagestation.com/picture/sraid19/pd861b6f1c7e1e6a7994ca18fd60272f6/fdc18ceb.jpg

u got a nice drop. if i were u, i would get exhaust cuz the system aint really important. das just my opinion. but if u get a system, check out audiobahn sub's.

hey matt, is that passenger front upper control arm still hitting the fender well? if it let me know, i'll finish shaving that little metal thing off with the dremel. hey matt, show some pics that we took while we were lowering the car.

Brad, the control arms up front arm fine. But the rear makes a wierd noise when i go over a bigger than normal bump. I thinkit may be the control arm hitting the fender i can't tell. So maybe some day this summer i need to bring it ova there and we can shave some of that control arm. Ill put those other pictures up as soon as a get a chance to upload them. Thanks alot for helpin me out.

Later