I recently posted Mesh grill questions. I installed this myself how does it look?




http://viewmorepics.myspace.com/index.cfm?fuseaction=viewImage&friendID=15285311&imageID=234596958&Mytoken=D7B6EFC6-81B6-4E5E-996D8F990AB396D9866507859

Cool, did you home depot or e-bay?

ebay 12 dollars plus 8 dollars shipping

How did it attach? Does it have a frame or is it just a piece of mesh with some screws?

you should have put it in the side holes also. thats what i did. just go to Home Depot and buy some for the sides.

I looked into that, but what glue whould I use and I found it hard to try to securelly hold it in place while a glue was drying. The front MEsh is held by 2 screws on the inside black plastic part.

i use zip ties! lol ;)

i couldnt find any place to tie zi ties, they came with the kit. it looks ok, you cant notice the screws unless you look deep into the sides.

I want to get some mesh and spray paint it black for my kit, can you link me to where you bought it, but i dont know how i feel about drilling holes into the kit...

I want to get some mesh and spray paint it black for my kit, can you link me to where you bought it, but i dont know how i feel about drilling holes into the kit...
If you want a darker looking one you can do what I did. Found a farm and cut out a peice of wire fence that keeps wolves away from the chickens. Looks just as good if not better than anything you buy and it's free as long as you don't have to bail yourself out or go to the hospital because of a guard dog.
http://www.dsmtuners.com/gallery/data/500/50204jeanie_117-med.jpg

lol @ ghettoness! AWESOME

You think I should put sort of like a gunmetal color to the mesh, that might look pretty sweet...

EDIT: Also, how would i go about getting it onto the bumper. I'm not big on putting holes through the kit, so some sort of clipping system would be ideal. Also, the front support bar is still there, my body guy wouldnt take it off... (hes my neighbor, and "has a son, and wouldn't feel good about me driving around without it or some shit) whatever... I kinda like how it closes the size of the front whole, doesn't look ugly either...

[QUOTE=soapsuds22]cut out a peice of wire fence that keeps wolves away from the chickens.
QUOTE]

Jacking for chicken wire :eek7: Redneck Tech. is cool.

If you want a darker looking one you can do what I did. Found a farm and cut out a peice of wire fence that keeps wolves away from the chickens. Looks just as good if not better than anything you buy and it's free as long as you don't have to bail yourself out or go to the hospital because of a guard dog.
http://www.dsmtuners.com/gallery/data/500/50204jeanie_117-med.jpg

Those poor poor chickens lol

looks pretty tight, just now work on getting mesh in the sides, like mine :)

http://img.photobucket.com/albums/v254/treefrog1112/frontlow2.jpg

Just don't tell anyone else it's chicken wire lol.

Here's mine. First 'visual mod' done to my car. Went to Home Depot and spent $2.78 for 2 pieces of gutter-guard. Hard time cutting the sides, but it looks awesome. Made a template and all. Remarkably, it's still in there, and in there good. Stayed in as I plowed through the snow in the winter and all the elements.

Check it out
http://www.dsm3d.com/af_pics/grill.jpg

Did the same thing on my boys MX6 too, but it fell out after 3 weeks.

I checked out gutter guard from your guidance, but it is wayyy to small to fit the entire opening of my bumpers.