99 Windstar Guages freaking out. Electrical?
Roadhired
09-19-2005, 08:27 AM
My wife has a 99 Windstar and sometimes the electrical guages, speedo, fuel, temp, etc.. all seem to freak out... The needles bounce back and forth then quit.... then magically they are working again.
Help!
Help!
DRW1000
09-19-2005, 09:57 AM
My guess would be a voltage problem either due to a bad battery, connections to battery, electrical connections to the gauges, instrument panel regulator (if equipped) or looseness of any of the above. I know that relays can cause strange things too.
12Ounce
09-22-2005, 01:10 PM
Ditto to DRW:
If it is relay related, my bet would be the PCM power relay.
If it is relay related, my bet would be the PCM power relay.
theman100
09-22-2005, 02:08 PM
Ditto to DRW:
If it is relay related, my bet would be the PCM power relay.
pcm power relay has nothing to do with the instument cluster...... you have a problem with a power or ground.. check ground g304 at the lh cowl panel. or the voltage reg on alt is going out.
If it is relay related, my bet would be the PCM power relay.
pcm power relay has nothing to do with the instument cluster...... you have a problem with a power or ground.. check ground g304 at the lh cowl panel. or the voltage reg on alt is going out.
Automotive Network, Inc., Copyright ©2024