|
|
Programming Keyless Remotevdsteelman 09-14-2005, 09:00 PM Hi, I'm new to this forum and really need some help. I just purchased a 2004 Grand Prix and it came w/ one keyless remote. I purchased another remote as a spare and need to know how to program it! I've searched online and have had no luck. Please help with suggesstions and/or help. Thanks all, Ben 2turboimports 09-15-2005, 08:21 PM I thought that was something that was supposed to be done by the dealership. Evidently I guess you can do it yourself...it seems a bit tricky, but it's worth a shot I guess. 2turboimports 09-15-2005, 08:22 PM wait...i found this on google...it's for a 98 Grand Prix, maybe it's the same steps for an 04 http://www.automotivehelper.com/topic47275.htm ------------------------------------------------------------------- Reprogramming RKE Transmitters We just bought a 98 GP GTP and only recieved one set of keys and remote. Searching through these posts I found many different instructions on programming a new remote. Here are the correct steps to program the remotes for a 1998 Pontiac Grand Prix. 1 Get in car and close all doors. 2 Pull the “mall pgm” fuse. 3 Insert key and turn ignition to ACCESSORY. (back 1) a. Listen for bell(s). b. Turn ignition off and quickly back to ACCESSORY. 4 Open and close door. a. Should hear 1 bell to confirm diagnostic mode. 5 Press and hold both the lock and unlock buttons on the RKE transmitter. a. Hold buttons for approx. 15 seconds. b. Bell should chime after 7 seconds, continue to hold for second bell. 6 Repeat step 5 for each transmitter. (max 4) (1 bell after 1st transmitter.) 7 Turn ignition off. 8 Replace “mall pgm” fuse. 9 Open Doors. 10 Test transmitters NOTE: Have all of your remotes on hand when starting this process. Resetting one will cause all others to not function. You must reset all devices at the same time. vBulletin®, Copyright ©2009, Jelsoft Enterprises Ltd.
Automotive Network, Inc., Copyright ©2009
|