I have a 94' CutSupSL no turn signals or brake lights. Ckd all fuses,bulbs and flasher under pass. firewall (junction box) I hear there also might be a flasher on the back of gas pedel linkage bracket at the firewall?? I also hear there is a "turn signal switch" module in the steering column?? The brake lights will work at NIGHT only. Have anything to do with the DRL control module, the daytime running lights do not work either. Does anyone know where the DRL mod. is?? Any ideas on workarounds/trouble shooting would be greatly appreciated. Thanks!! ElecTec

When my backlights/turn signals didn't work, I had to change the module in the steering column, but even after changing that, sometimes I still have a problem with the left turn signal not working. Light will come on in the dash board, but doens't turn off and on sometimes.

As I should have figured..The labor intensive steering coulmn switch/module was the problem..for now. Thanks for all the info on this board!!! I will check back soon..To learn or help...Believe me I learned alot on the wiring of a 94-95 cutlass supreme 4 dr. 3.1. Hit this post and I will do my best to help! Thanx again!! RocKTec7

As I should have figured..The labor intensive steering coulmn switch/module was the problem..for now. Thanks for all the info on this board!!! I will check back soon..To learn or help...Believe me I learned alot on the wiring of a 94-95 cutlass supreme 4 dr. 3.1. Hit this post and I will do my best to help! Thanx again!! RocKTec7


Yea, newbe can't get a handle on his handle....RoKTek7...not bad, maybe I'll stick with that one...KISS keep it simple stupid!

i have the same problem with my car. no turn signals?? I dont think this car is even worth fixing??
transmission is slipping also

I was having some problems with my tail lights b4 all iu had to do was replace the sockets and they work fine.

Scoot

Worth a try.