Our Community is 940,000 Strong. Join Us.


95 keyless programming


pungoVA
08-31-2005, 09:09 PM
1)Ground pin G of DLC connector under driver side dash,receiver will cycle locks within 2 seconds.

2)Press any button on Key module,locks will cycle.

3)Remove grounding wire.

4)Test Remote

5)Smile!

This worked to program my 95 suburban keyless remote.

1990roel
02-15-2006, 08:18 PM
Do you just ground the wire to a piece of metal, or is there a certain metal contact in the DLC connector you have to attach the wire to?

Add your comment to this topic!