Our Community is 940,000 Strong. Join Us.


Ambulance Modification


firefighter3110
08-23-2005, 03:31 PM
Alright, I am currently the maintenace person at a small ambulance company, basically I do the oil changes, tire rotations and anything else that needs to be done. Anything major such as engine/tranny work goes to a shop. Recently the covering of the muffler came off and I asked my manager if I could replace the whole system with stacks on either side of the box, he said yes, which i wasnt expecting. I have looked under the vehicle and checked some thing out. I have seen that it wouldnt be hard to split the original tubing and start new ones that branch to either side, run up the side of the box and end in some stacks. So now im asking, does anyone know where I can get stacks and just a bunch of tubing so I can make an exhaust system myself, or some suggestions on what I should do, such as do I need to add headers and do I need to have mufflers on their. Anything else would be appreciated such as watch outs and any other pointers. My boss pretty much wants to make this ambulance a badass ride since right now its pretty gutless. So anything would be much appreciated.

Add your comment to this topic!