i have a 1998 grand am se

i am trying to install speakers in the front of my car, and i dont know how to take off the window cranks!

please help me out before i end up breaking my car more than it is

Thanks
Dan

crank windows? well they make a tool, thats pretty cheap.you can also use a clean shop rag between the handle and the door panel and pull on the rag to pop the clip loose, may take a few trys, but the handle should pull of. Hope this helps.

Welcome to Automotive Forums.

yea,
xero's got it!
the rag trick works, but claw hammers' are more fun (just kidding)
or use a couple of jeweler's screwdrivers or picks to push that little metal clip out of the way.
that tool though is only a couple of bucks at the parts store.

thanks on the part, i went out and got it it was like 5 bux but anywho..

i was looking and i found a plastic ring is this what you were talking about?

i dont knnow if that is in fact the "clip" or if theres something else that im missing

its around a metal stick in between the plastic handle and the inside door panel

wow i know nothing about interiors...or doors for that matter.

HELP ME PLZ!!

Thanks,
Dan

i guess it could be plastic or metal. it's the only thing you should see in between the door panel and on the crank handle and shaft.

thANK U SO MUCH!!!!!

i apreciate the help

i dont have a picture. thought i might have a handle laying around but i didnt. the clip usually goes into the handle holding it to the shaft. you may want that hammer :)