I have a question about replacing the VC. I was wondering if there is anything that I should Know before I do this such as, do I need to mark anything anywhere? I have never taken a TC out but I think that I can do it. I have looked into it alittle and to only replace the VC it looks and sounds decently easy. I have taken out and put motors and tranys in but no TC. I would appreciate some help on this issue I have. I have a 95 Grand Cherokee Laredo 5.2 np 249 TC, the quadra-trac.

Shawnbart,

Here is a site you should visit if you haven't already. there are some great pics that will walk you through the VC removal. I used to send these pics to everyone who asked for them, always took about 3 emails to send all the photos, then a friend on the forum (here) offered to place them on his site for everyone to see. Made it easier on me and everyone else.

Here is the site http://www.masoncomputing.com/np249/

Hopes this helps, As for the alignment markes, the only one I would worry about would be for the driveshafts so you make sure they go on the same way the come off (to keep it balanced).

Thank You for the help that site is very helpful!!! I really appreciate it.

Let us know how it turns out.