PROGRAMMING INSTRUCTIONS for 04 Sebring
kclough
08-04-2005, 09:15 AM
I just got a second FOB for a 2004 Sebring. Does anyone have instructions for programming. I have no scan tool, so it has to be manual. Thanks
theFREAKnasty82
08-04-2005, 10:12 PM
If you already have one working remote, here are the instructions:
1. With the vehicle in Park, turn the Ignition switch to the ON position.
2. Using a previously programmed transmitter, press the Unlock button on the transmitter. Continue to hold the Unlock button, wait at least 4 but no longer than 10 seconds, then press and hold the Panic button for at least one second. Release both buttons simultaneously. You will hear a chime to signal that you can proceed with programming the new transmitter.
3. Press and release the Lock and Unlock buttons simultaneously, followed by the press and release of ANY button on each new transmitter to be programmed as well as the previously programmed transmitter. You will hear a chime when a transmitter has been successfully programmed. You will have 30 seconds to finish programming all the new transmitters. A chime will sound when the 30 seconds is over or the ignition switch is turned to the Lock position.
If you DO NOT have a working remote, you will have to visit your local Chrysler dealer and have them program your remote to your car.
1. With the vehicle in Park, turn the Ignition switch to the ON position.
2. Using a previously programmed transmitter, press the Unlock button on the transmitter. Continue to hold the Unlock button, wait at least 4 but no longer than 10 seconds, then press and hold the Panic button for at least one second. Release both buttons simultaneously. You will hear a chime to signal that you can proceed with programming the new transmitter.
3. Press and release the Lock and Unlock buttons simultaneously, followed by the press and release of ANY button on each new transmitter to be programmed as well as the previously programmed transmitter. You will hear a chime when a transmitter has been successfully programmed. You will have 30 seconds to finish programming all the new transmitters. A chime will sound when the 30 seconds is over or the ignition switch is turned to the Lock position.
If you DO NOT have a working remote, you will have to visit your local Chrysler dealer and have them program your remote to your car.
Automotive Network, Inc., Copyright ©2024