i just bought a light bar for my roof how do i get the wires into my truck do i have to drill? any suggestions will held thanks

the most direct route is to drill a hole in the roof.

not a fun thought.

--B

the most direct route is to drill a hole in the roof.

not a fun thought.

--B

Any work around ideas that make drilling unecessary?

http://www.oramagazine.com/pastIssues/0503-issue/050301t-maya-hunter.html

check out what they did with using harnesses as quick disconnects

http://www.oramagazine.com/pastIssues/0503-issue/050301t-maya-hunter.html

check out what they did with using harnesses as quick disconnects
I don't get it, they say this:
"We ran one pigtail through the roof into the cab"
does that mean they drilled? Then what do the quick connect harnesses do?

the quick disconnect makes it so you can just unhook a few connectors to disconnect the lights(electrically speaking). once that is done, you can easily remove the whole basket/light bar and remount it in a few minutes w/o unhooking stuff.
i believe they drilled into the roof underneath the roof racks to hide the hole and wires as much as possible

the quick disconnect makes it so you can just unhook a few connectors to disconnect the lights(electrically speaking). once that is done, you can easily remove the whole basket/light bar and remount it in a few minutes w/o unhooking stuff.
i believe they drilled into the roof underneath the roof racks to hide the hole and wires as much as possible

Thanks!