|
|
need 88 brougham woodgrain strip that goes on door panelrandy78 07-21-2005, 12:34 PM for pass side door in 88 brougham classic LS sedan i need the front pass side door woodgrain strip for door panel that mounts where the door pull strap is, and any(and all) hardware and/or clips related to this and hardware, also i neeed four matching pull strap mounting screws, original ones and end caps woodgrain plastic ones lemme know where one of these is being parted that would have these, if someoen had one that didnt match mine but if they had all this for both front doors all matching then id go that way, if it all fits on 88 panels thanks PeteA216 07-22-2005, 10:22 PM I know I always say this, But I've seen way too many of those woodgrain bases for the door straps at my local junk yard. randy78 07-25-2005, 12:00 PM well i appreciate your reply and such but cars like this do not make it to yards, and if so do in very few isolated cases, ppl like to strip and demo them here,its the biggest event around here, so someone please HELP also need driver side door mounted 6 way power seat switch assembly and wiring plug with length of wires i see some of you are parting one of these, so please get with me on this asap thanks PeteA216 07-25-2005, 05:19 PM Where do you live? Here in NY, Caprices go to the yard all the time, just because of rust and rot. In most cases the cars run beautifly, but get scrapped or crushed. Its kinda depressing. vBulletin®, Copyright ©2009, Jelsoft Enterprises Ltd.
Automotive Network, Inc., Copyright ©2009
|