Our Community is 940,000 Strong. Join Us.


HELP '92 estate brake light(on back glass) doesnt work


rnj
06-21-2005, 12:48 PM
can anyone tell me how this light works??? as i see no wires running to it but do see contacts. the bulbs r fine, but they don't light up when i press the brake. Also, the plastic around the bulbs are burnt and melted, is this from the years or r they getting to hot?

jawnl
06-23-2005, 10:52 PM
can anyone tell me how this light works??? as i see no wires running to it but do see contacts. the bulbs r fine, but they don't light up when i press the brake. Also, the plastic around the bulbs are burnt and melted, is this from the years or r they getting to hot?
My personal experience with my '93 when that light doesn't come on is that the contacts in the casing need cleaning (cold climate = corrosion) - I carefully unbolt it from the glass and take it apart to clean those contacts. Sure seems like your bulbs got too hot - they're the right ones?

rnj
06-29-2005, 10:56 PM
I'm not sure, I think they are the wrong ones. I just bought this car about a month ago and I noticed that that brake light didn't work. So I went and bought some replacement bulbs and found that the contcts where pretty corroded and the bulbs were much bigger in circumference than the replacements I bought.

Duncan1
07-03-2005, 01:01 PM
You might need to clean the 2 spring loaded posts that stick out on top of the rear gate as well as the contact plate on the bottom of the glass. A non-working 3rd brake light might also affect your cruise control.
Good luck.

rnj
07-04-2005, 01:24 PM
You might need to clean the 2 spring loaded posts that stick out on top of the rear gate as well as the contact plate on the bottom of the glass. A non-working 3rd brake light might also affect your cruise control.
Good luck.


thanks, i cleaned contacts with wire brush works fine!!!

Add your comment to this topic!