Ok my cousin and uncle have a '84 S-10 blazer. We put a 350 in it and we have headers but with the headers there very little room in it and we are havein trouble with tryin to find a way to run the spark plug wires and i was wonderin if anyone else has done this project and found a good way to run the wires without them layin up agains the headers and burnin.


Please help out. thank you

Have you looked for any wire looms that thighten down under the bolts on the side of the valve covers that face the intake manfold?

i havent seen any ill look or ask about that when i go back over there

I guess if you cant find any other way, a cheap, easy way (but not very attractive) would be to ziptie them up around the intake manifild, and have them run straight down to the plugs so they can't drape over the headers.

Later

-Ryan

personally, i would wrap the headers in that shit that keeps the heat in, then run wire loom, and like mentioned above, if worse comes to worse, zip tie it down, although i would look for another way b4 zip ties

although i would look for another way b4 zip ties
When you live/work on a farm, you learn to improvise;)

Later

-Ryan

When you live/work on a farm, you learn to improvise;)

Later

-Ryan
for a temp fix it would be ok, but i like to show off, and opening my hood, and haven zip ties there, judges dont like them