Does anybody know which ignition wire have to be on the specific cylinder on a 2.5l 6 cylinder engine?
I know the firing sequence and I know where to connect the cables, but the problem I have is that each cable has a different length.
Okay I measured the cables:
cable / length / resistence
1 / 26" / 1.0170 kOhm
2 / 31" / 1.2270 kOhm
3 / 22" / 0.8580 kOhm
4 / 30" / 1.1860 kOhm
5 / 20" / 0.7813 kOhm
6 / 25" / 0.9860 kOhm

So folks: How to connect the cables?
Or doesn't matter? :confused:

If it reaches the plug you should be fine. I've used cables that were too long and the extra resistance had no effect.