2003 dodge keyless entry
paexpedition
04-29-2005, 10:37 AM
Does anyone know how to program a keyless entry remote for a 2003 Dodge Intrepid.I would appreciate any help any one can give.
theFREAKnasty82
05-03-2005, 07:19 PM
1. Turn the key on, engine off.
2. Using a previously programmed remote, press the "UNLOCK" button on the remote; hold "UNLOCK" button for at least 4 seconds then press the "PANIC" button for at least one second. Release both buttons simultaneously. You will hear a chime to indicate that you can proceed programming the new transmitter.
3. Press and release the "LOCK" and "UNLOCK" buttons simutaneously, then press and release any button on each new remote. You will hear a chime indicating that each remote has been sucessfully programmed. You have 30 seconds to program all new transmitters, after that, a chime will sound telling you that programming has ended.
2. Using a previously programmed remote, press the "UNLOCK" button on the remote; hold "UNLOCK" button for at least 4 seconds then press the "PANIC" button for at least one second. Release both buttons simultaneously. You will hear a chime to indicate that you can proceed programming the new transmitter.
3. Press and release the "LOCK" and "UNLOCK" buttons simutaneously, then press and release any button on each new remote. You will hear a chime indicating that each remote has been sucessfully programmed. You have 30 seconds to program all new transmitters, after that, a chime will sound telling you that programming has ended.
Automotive Network, Inc., Copyright ©2024