my car is hard to shift and the petal is acting up, when i slow down it want to go down. its a brand new master cylinder, it worked fine untill i smoked my clutch. would this have anything to do with the clutch?
thanks

Being hard to shift has never been something I have heard related to CW. The best thing to do, if you are concerned, is measure the endplay in the crank. You can do this fairly easily.

It could, did you replace all the internels in the trany? Like the fork? Things like that. I don't think it is crank walk. That is really not what happens if it was. Maybe try bleeding the mas better.

ive bleed it several diffrent times, maybe its defected master, the first one i put on sucked to the floor, then i got this one and it worked fine for awile then i smoked the clutch and right after that it started doing it.

get 2 friend. read the vfaq and bleed the clutch right.

its bleed right i know how to bleed so thats not the problem

try replacing the master before going and tearing apart the whole motor just because you THINK it's crankwalk.

Measure the crank endplay!!! :banghead: