Hey... I was hoping someone here would be able to help me out. My buddy has a program called Dyno 2000 and it estimates hp and torque given info about an engine. so what I need are the technical specs for the ZC Engine. Here is a list:

1) Bore and Stroke
2) Intake and Exhaust Valve size (inches)
3) Compression Ratio
4) Induction flow (cfm) @ X inHg
5) Lifter Type
6) Cam specs @ Seat-to Seat
7) Intake Lift @ Valve (inches)
8) Exhaust Lift @ Valve (inches)
9) Lobe Center
10) Valve Overlap
11) Intake Duration
12) Exhaust Duration


Thanks