96 intrepid

I have a 96 Intrepid. After disconnecting the PCM and plugging it back up the car won't start. There is only about 2.2v at the crankshaft sensor instead of 8v. There is no voltage to the coil pack. The fuel pump is pumping gas but no spark. Please help.

If you disconnected the PCM WITH the battery still hooked up, you probably have puked your PCM.

The battery was disconnected. Tried a different PCM but it would not start either.

what size of engine do you have the cam sensor shares the same 9 volt circuit if equipped with a 3.3L check the harness at the valve cover on the front passengers side sharp edge shorts harness there and if ok try disconnecting cam sensor and recheck voltage