I have a '00 s-10 with a envoy swap and i want to run my envoy foglights so they work with my low beams. i dont want a switch and i want them to go off when my high beams are on. can anyone tell me how to or help me find out how to? thanks.

splice them in with the low beams as a switch

im not quite sure what you mean. im tring to get rid of the switch

hook them in with the low beams, then when the low beams arent on the envoy lights wont be either

dmbrisket 51 is right. That's the only logical way.

You'll want to run a relay to atleast the headlights or you risk burning out the wiring. I would run seperate relays to everything if I was doing the job. It's cheap insurance when you consider the cost of replacing the wiring, and or switches


Doing all the wiring should be easier than all the envoy swap was. Just take your time and relax.
When you get frusterated take a coffee, or quit for the day

coffee is an upper, you need a beer to think stright lol

I think that Hank Hill from the king of the hills sayes it best.

Beer, is there anything that it can't do?

Or was that Homer Simpson?

doesnt matter they were right....big pokie, what me and overboard have said, it all makes seince right?

I think so!!!