ok, i was in town today and i stoped at the shop and when i left all i was getting was mad sputtering, and it idle's like 700 rpms lower than when it was running fine....... i'm sure it's somthing dumb but if anybody has had the same prob let me know.

did you guys dink with the engine at all at the shop? when does it sputter, all through the rpm band, or just lower or just higher rpms? oh yeah...any codes?

well i ended up finding the plug wire caps on the dizzy side were arching, so i figured that was the prob, NOPE.... so i dropped new plugs in this morning, NOPE. so i said fuckit and took the cap right off and there's a crack in the middle of it that's barely visible.... but that's what it was.

I have said I dont how many times on forums the early B16a caps and rotors are crap, and very prone to cracking.

In fact they are so bad Honda discontinued them, and now sell the later B16a cap and rotor as a replacment. the only thing you have to do is change the grub screw from the rotors over. and make sure you use the new rotor and cap. the old rotor does not work with the new cap.