noise in 1,2,3 gears

Vero'sCivic

03-17-2005, 02:32 PM

My 94EX makes a rattle nosie when Im in 1st 2ed and 3ed. I took it to Aamco and they said it was in the transmission. They want to charge 400 to to take it apart and tell me what it is. I think they just want to take my money can someone help me out and let me know what i can. It dosnt stall or anything it just makes a rattle noise is it even worth looking at or should I just let it be.

slow_99integra

03-18-2005, 08:59 AM

My integra does the same thing, but it is between 3500 and 4200 rpm. i had my dad rev up the engine with me looking under the teg. turns out, my heat shield around my cat was vibrating, bad. my car is lowered and too low for me to get my shoulder under. its annoying to say the least.

Vero'sCivic

03-18-2005, 11:51 AM

ya i checked all that out i put in up on a rack and checked for anylose items but didnt find any and the heat shied was the first thing i checked. Thanks for helping I guess Il just live with the noise for now.

snowman2005

03-19-2005, 12:14 PM

if their gona charge u 400$ might as well buy a used trans in good condition

fasthatchb18c1

03-19-2005, 04:26 PM

I'd say its your throw out bearing. You can try sitting at idel and depress the clutch and see if it makes that noise, then let off and see if it stops.

BullShifter

03-20-2005, 01:57 AM

I'd say its your throw out bearing. You can try sitting at idel and depress the clutch and see if it makes that noise, then let off and see if it stops.
That's not always true. 9 out of 10 times it will be a bad input shaft bearing, especially if the car is driven hard.

E Honda

03-20-2005, 02:22 AM

HiRev'n

03-26-2005, 01:32 PM

It could be a loose exhaust manifoldso try and check that.

Vero'sCivic

03-29-2005, 02:36 PM

It could be a loose exhaust manifoldso try and check that.

ya thats what it was the exhaust manifold thanks to all for your help
no more noise!!!

Add your comment to this topic!