Has anyone upgraded their t25 to a t28. Everything bolts on right and the oil lines even work but the FMIC piping doesn't line up. What should I do?

Rare Trick Sells the Kazama Adapter that rotates the Compressor Side Elbow to Matchup... I think

or make your own piping???

No dude! Get oil lines (anywhere where they do pluming lines) then get elbow that connects to the intake (use the T28 elbow, the T25 one will not work) the intake rubber piping will bend a bit. But that is normal.

Upgrading the oil lines is always a good thing, helps in preventing oil starvation to the turbo.

wait your saying the oil lines from the t25 are no good even though they line up perfectly??? and also I have the greddy vspl front mount and all of the piping is aluminum won't bend the problem is the hot pipe angles down to much and won't line up with the pipe going to the hot side of the intercooler.

I'm going to check on the kazama thing though

well the lines (mine at least Broke)
for the piping, the hot pipe (the black stock one ) leave it alone, the piping should connect from that to the intercooler..



AHHH OK OK read this, it should help allot..

http://www.zeroyon.com/TheSite/frames.html

you need to fabricate a hotpipe. duh :)

uhh..yeah well mine is all getto welded pip... (i retained the stock black pip one from the Turbo to the fuse box)

(yeah TNX my nismo)

I liked the videos...that was awesome i dont remember what video but this 2nd Gen RX-7 Revs it up and that thing back fired like crazy!

mynismo are those new rims?

red calipers !!!