Yeha I just bought a new carbon fiber/leather APC racing steering wheel and I wanted to hook p the horn to the NOS buttons. The thing is I'm not exactly sure on how to do that. Any one has any ideas?

Figured this one out as well. All you gotta do is connect the 2 red wires together and slip them over the metal piece that you connect the wires to. Then for the 2 black ground wires, I took them and took the wire that comes directly from the car. I held them together and taped them together and made sure the tape was tight otherwise the connection wouldn't be made. One I did that tested out the buttons and they worked perferctly fine. Then just put the wires inside the hub and screw on the screws and you have a nice APC racing steering wheel with red horn buttons.