Steering Collumn Installation Help!!

I have a 1987 Chevy S10 Bazer. The people that had it before me turned it from an automatic to a stick. When they did they decided to have a push start button instead of the original ignition with key. This doesnt work sometimes and I have a new steering column, however I am unsure of how to install it, any help would be awsome!! Thanks So Much!!!!

Disconnect all wiring along the steering shaft. Disconnect the intermediate shaft at the steering box. Remove the 3 13mm nuts holding the base of the steering column at the firewall under the dash. Remove the 2 15mm nuts holding the steering column to the dash itself, pull out slowly to make sure that you got all the wiring. Install in reverse.

easy job, just make sure that the columb is the right one. Chevy changes them way to often, and it might just be 1 plug different which will really mess you up