Engine Vibration!!!!!!
maddoghill05
02-16-2005, 10:30 PM
Heres the deal i blew up my engine and replaced it with the same 2.8 V6 engine i had in it before i just got it in and started it up and the engine vibrates dramatically does anyone have a solurion to this problem?
BlazerLT
02-16-2005, 10:41 PM
Check timing?
Motor mounts tight?
Tune up?
Motor mounts tight?
Tune up?
Cam1959
02-17-2005, 02:09 PM
Heres the deal i blew up my engine and replaced it with the same 2.8 V6 engine i had in it before i just got it in and started it up and the engine vibrates dramatically does anyone have a solurion to this problem?
maybe a useless reply assuming you put all back as it was, but ... i had motor related vibration that was found to be few missing bolts from top of tranny-motor connection 8-O ;-)
also, news to me from these forums and checking my haynes book, there is a vibration damper on outside front of motor down behind lower crankshaft pully and timing chain cover ... could something be wrong here ? ... but like blazerlt said, check the easy stuff 1st.
maybe a useless reply assuming you put all back as it was, but ... i had motor related vibration that was found to be few missing bolts from top of tranny-motor connection 8-O ;-)
also, news to me from these forums and checking my haynes book, there is a vibration damper on outside front of motor down behind lower crankshaft pully and timing chain cover ... could something be wrong here ? ... but like blazerlt said, check the easy stuff 1st.
fjeff01
03-04-2005, 10:15 AM
what year is the truck and what year is the motor you are putting in the truck there are two different flywheel one is internal balance and one is external I had the same problem.
Automotive Network, Inc., Copyright ©2024