I just replaced my clutch in my 95 neon and now the clutch pedel travels to the floor and does not engage anything. I also have about 2" or more of play in the clutch cable, is there any way to adjust this, or is there something wrong with the installation??
NEED HELP!!!!!!!!!!!!

Your gonna have to take that back out and use a c,luch cable or clutch adjuster and make it right. Im not sure on the process but im almost 100% sure that is what you will have to do. Good luck. And depending on your motor mounts i would do the cold air intake.

slave cylinder is not engaged

Hey why not all of them. But if only one then definitly the intake. Last summer I put in an intake and engine mounts and the mounts were also definitly worth it.