squeaky
'89sdimeblazer
02-07-2005, 08:37 PM
my front end squeaks when i hit a bump or turn so i greesed the front end and shit, think it might be the shocks ne input?? thanks
BlazerLT
02-08-2005, 03:04 AM
did you grease all 11 fittings?
'89sdimeblazer
02-11-2005, 11:52 PM
i thought there was only 6??
BlazerLT
02-11-2005, 11:54 PM
Nope, 11
rlith
02-12-2005, 06:15 AM
inner outter tierods, both sides (4)
pitman arm
idler arm
upper and lower ball joints both sides (4)
both u-joints (only if after market, OEM doesn't have any zerk fittings) (2)
(Total=10-12)
Another possibility are worn sway bar bushings... Pull, grease the pad, reinstall.
Check for play/cracks/dry rot in your control arm bushings, common issue.
Check for dry rot in your body mount bushings
pitman arm
idler arm
upper and lower ball joints both sides (4)
both u-joints (only if after market, OEM doesn't have any zerk fittings) (2)
(Total=10-12)
Another possibility are worn sway bar bushings... Pull, grease the pad, reinstall.
Check for play/cracks/dry rot in your control arm bushings, common issue.
Check for dry rot in your body mount bushings
BlazerLT
02-12-2005, 12:38 PM
Yea, I had to replace my swap bar end links and the sway bar bushings.
Did the ride ever tighten up after the install too.
I recommend the poly aftermarket end links and the rubber AC Delco sway bar bushing from the dealer.
Did the ride ever tighten up after the install too.
I recommend the poly aftermarket end links and the rubber AC Delco sway bar bushing from the dealer.
Automotive Network, Inc., Copyright ©2024