I AM AFTER 1984-1987 4AGE AE86 RWD CYLINDER HEAD STUDS, BOLTS, NUTS, TO INCLUDE EXHAUST, INTAKE, DISTRIBUTOR. ALSO FLYWHEEL BOLTS, A CRANKCASE WITH REAR AND FRONT PLATE, OIL PAN AND ALL BOLTS. SO FAR THE "PROs" HAVE BEEN UNRELIABLE. DO NOT NEED RODS, CRANK, PISTONS OR FLYWHEEL. BUILDING 2ND (PERFORMANCE STREET) ENGINE. ASSISTANCE GRATEFULLY APPRECIATED. ChJos5@aol.com (505) 856-8351 Fax or Voice Line, Albuquerque, NM USA. :banghead:

You can get them all from toyota pretty cheap just remember that the exhaust and intake bolts are 2 separate lengths so they are different part #'s also you will need the hardend steel washers that go betweene the head and bolts toyota sells them separate I paid aroun 30 for mine and the exaust intake bolts are around .80 a piece so you might as well buy them new. ARP ead studs are like 120$ so there is that route but the 4age hardly makes enough power to worry about and head bolt problems.