I am getting ready to lift the good ol' Jeeper Creeper 4 3/4" the only thing I am worried about is driveshaft vibration. I need some opinion, do you think the 4+ lift will cause driveshaft vibration? and Whats an easy fix for this?

I am getting ready to lift the good ol' Jeeper Creeper 4 3/4" the only thing I am worried about is driveshaft vibration. I need some opinion, do you think the 4+ lift will cause driveshaft vibration? and Whats an easy fix for this?

OK, it is not recommended to lift a ZJ over 3in. That being said, if done right, you can go as high as 8in if one has the money and desire. Which engine and tcase do you have? what is your goal with it? what is your budget for the project? tell me more and I'll tell you more.

5.2L, NP249

just some muddin, nothin big tho, every ZJ i know has a 2 or 3 in I waned something a bit more. I can get the 3in skyjacker for $620, plus some 1 3/4" Coil Cpring Spacers for under $100.

I just wanted to know if there would be any driveshaft vibration with the 4 3/4" lift, and would the 3' alone have any driveshaft vibration.
this all without having to get a TC lowering kit or high angle Driveshaft.

stick with the 3in lift with some nice 31's and call it a day. otherwise you WILL have issues because you would not be doing it right.