|
|
Engine light on after o2 sensor replacementnewmanator949 01-26-2005, 01:02 PM Hi, I have a 1996 Isuzu Trooper with the 3.2L The engine light has been on for quite a while, I pulled the codes just recently and the scanner retrieved the following: "O2 sensor out of range... Bank 1 post CAT" (something to that effect) Following, I replaced the O2 Sensor on the drivers side after the CAT. About 20 miles down the road (After I cleared the codes) the Engine Light re-illuminated. I will pull the codes again tonight and see if something else is now out of range. Here's the scenarios I am contemplating. 1. I replaced the incorrect O2 sensor 2. The new o2 sensor is faulty 3. CAT is Bad on Drivers Side ( I have been clearing the codes before smog checks here in CA and it passes) Please, If anyone has any more input I would appreciate your comments. I need to resolve this problem. Thanks, Mike vBulletin®, Copyright ©2009, Jelsoft Enterprises Ltd.
Automotive Network, Inc., Copyright ©2009
|